Explore representative clean-tech solutions engineered by Murickens Group: Solar hybrid inverters, elevator UPS backup, agricultural solar water pumps, servo stabilizers, and medical mortuary cold storage.
High-efficiency Pure Sine Wave Solar PCU (650VA–6000VA) engineered with copper windings, dual AC/Solar floating-trickle charging, and digital/analogue control, delivering stable 230V AC output across wide input ranges (180V–270V AC / 12V–48V DC) with 95% operating efficiency.
High-capacity Standalone Solar Inverter engineered with high-surge motor-starting capabilities and pure sine wave output to reliably power inductive household and light commercial loads entirely independent of the utility grid.
High-efficiency, direct-drive solar water pump powered directly by PV panels, delivering reliable continuous discharge for agricultural irrigation, deep-well extraction, and rural water supply without storage batteries.
High-efficiency Evacuated Tube Collector (ETC) solar water heater engineered with triple-layer borosilicate glass tubes and a heavy-duty food-grade stainless steel (SS 304) inner tank with thick PUF insulation to deliver continuous high-temperature hot water even under low-sunlight and hard-water conditions.
Precision-engineered copper-wound servo voltage stabilizer delivering continuous, ultra-stable 230V/415V AC output within ±1% accuracy with fast motor-driven correction and advanced overload protection for sensitive electrical equipment.
Hygienic multi-body mortuary cold storage chamber built with high-density CFC-free PUF insulation panels, heavy-duty stainless steel (SS 304) sliding body trays, and digital microprocessor temperature control (0°C to -10°C) for reliable cadaver preservation.
Heavy-duty conventional/ESE lightning arrester engineered with high-conductivity pure copper/GI spikes and advanced surge dissipation technology to safely divert direct lightning strikes and high-voltage transients into the ground, safeguarding buildings, solar PV installations, and sensitive electronic equipment.
High-efficiency utility and rooftop solar on-grid power plant engineered with Tier-1 Mono PERC solar panels, advanced multi-MPPT grid-tie inverters, and precision net-metering synchronization to deliver maximum clean energy yields, significant power bill reductions, and seamless utility grid integration.
Advanced batteryless solar grid-tie inverter engineered with high-efficiency MPPT tracking, real-time load compensation, and direct PV-to-load synchronization, delivering uninterrupted daytime solar power directly to connected equipment without requiring costly battery storage.
Heavy-duty C10-rated deep-cycle tall tubular battery engineered with high-pressure die-cast spine grids, high-acid volume per ampere-hour, and low-antimony alloy composition to deliver long backup duration, superior cyclic endurance, and reliable performance even through frequent power outages.
High-efficiency MPPT/PWM solar charge controller engineered with ultra-fast maximum power point tracking, multi-stage intelligent battery charging algorithms, and robust electronic protections to optimize PV energy harvest and extend battery life across diverse 12V to 48V DC power systems.
High-efficiency all-in-one / integrated solar LED street light engineered with high-lumen optical lenses, long-life Lithium Ferro Phosphate (LiFePO4) battery storage, and an intelligent MPPT dusk-to-dawn charge controller with smart dimming sensors for reliable, weather-proof outdoor roadway illumination.
Industrial-grade modular digital high and low voltage protector engineered with high-speed microcontroller logic, precision RMS voltage sensing, and heavy-duty electromagnetic switching to shield sensitive domestic, commercial, and medical equipment from sustained over-voltage, brownouts, phase surges, and transient line fluctuations.
Heavy-duty commercial deep freezer engineered with high-efficiency tropicalized hermetic compression, multi-directional roll-bond refrigeration circuits, and high-density CFC-free PUF insulation to guarantee sub-zero thermal retention, rapid pull-down times, and dependable cold-chain integrity for food storage, laboratory reagents, and clinical biologics.
High-efficiency monocrystalline PERC and N-type TOPCon solar photovoltaic modules engineered with multi-busbar half-cut cell architecture, high-transmittance anti-reflective tempered glass, and corrosion-resistant anodized aluminum framing to deliver superior low-light power yields, optimized temperature coefficients, and decades of structural durability under harsh outdoor environmental conditions.
Portable domestic and rental-grade dead body freezer box engineered with US-technology-based silent refrigeration, full pure stainless steel construction, and 100% high-density cyclopentane PUF insulation to deliver dependable sub-zero preservation (-2°C to -20°C), panoramic viewing from all angles, and smooth wheel-mounted transit for funeral ceremonies and extended household retention.